Standard-Duty Battery Switch, Dual Circuit Plus
This Product is Currently Unavailable
- SKU:
- EBS-2411
Related Products
Product Description
Pacer Standard-Duty high-amperage switches are vapor/ignition protected and UL listed. They are designed to increase safety on a marine vessel by isolating the battery in case of fire. A battery switch such as this is required to be on boats that have more than 800 cranking amps. These switches carry a 525 amp (for approximately 5 mins.) intermittent rating. All Pacer battery switches are built to handle the toughest marine conditions possible, which is why you will find them on just about every larger-sized boat.
Characteristics:
- Sealed Against Dust & Water Intrusion to ensure reliable circuit protection for the life of the electrical system installation.
- Ignition-protected safe for installation in closed compartments with potential explosive gases.
- Serrated Flange Lock Nuts improve resistance to cable terminal loosening in high-vibration environments.
- Flexible mounting options allow for multiple mounting configurations and a variety of installation types.
- Harsh environment design with stainless-steel hardware, serrated flange nuts, and high-temperature material.
Features:
- Isolates electrical loads from batteries when the electrical system is not in use.
- Simple battery control operation allows connecting, isolating, and combining up to two batteries with one switch.
- Bullet-proof construction: stainless steel hardware, tin-plated copper, and high-temp materials support harsh environment applications.
| Maximum Voltage | 48 VDC |
| Maximum Voltage (Selector / Dual Circuit) |
32 VDC |
| Stud/Thread Size | 3/8”-16 |
| Terminal Stud Torque | 140 in-lbs (15.8 N-m) |
| Ring Terminal Size Acceptance | 3/8” (M10) |
| Mounting Holes | 1/4" (M6) Screw |
| Switching Rating | 25 Amps |
| Ignition Protection Rating | SAE J1171 / ISO 8846 |
| Panel/Bulkhead Mount Hole Size | 3-5/8” Diameter |
| Cable Size to Meet Rating | 4/0 AWG |