14 AWG Jumper with Disconnects
$1.565
- SKU:
- EJ14RD4-250-250
- Minimum Purchase:
- 10 units
Related Products
Product Description
| AWG | 14 |
| Insulation Colors | Red |
| Length | 4" |
| Terminal 1 | 0.250 Female Disconnect |
| Terminal 2 | 0.250 Female Disconnect |
Wiring a piece of equipment with multiple short wires can be time-consuming and frustrating. Having to prepare each wire by striping and terminating them can take more time than one might think. Not to mention adding heat shrink for protection. By using wire jumpers, all the hard work is done for you. All you have to do is plug them in and you're done. It really is that easy. No need to strip, terminate, heat shrink or perform any of the other steps involved. Pacer's 14 AWG jumpers with disconnects are ideal for connecting lights from switch to switch. Alternatively, they are used to connect switch light grounds or to jumper from switch to breaker.
All our wire jumpers are made from Type III Class K tinned copper conductors. The wire is then insulated with a durable and flexible PVC jacket. After that, they are cut to length and terminated. A waterproof heat shrink tube is added for extra protection. All Pacer's wire jumpers meet the requirements and standards of UL, ABYC, and NMMA.
Characteristics:
- Conductor: Annealed finely stranded tinned copper ASTM B172 Class K
- Insulation: -20 °C to 105 °C Flexible, Color Coded PVC
- Temperature Rating: 105 °C Dry, 75 °C Wet, 60 °C Oil
- Voltage Rating: 600-V
- Resistant to: acid, alkali, abrasion, flame, gasoline, oil and moisture
Compliances:
- UL Stranded 1426 BC-5W2
- AWM 1015/1230
- MTW
- ABYC: E-11.15
- Coast Guard: 33 CFR 183.401 Subpart 1-Electrical Systems
Features:
- Stranded, tinned copper conductors
- Highly flexible color coded insulation