14 AWG Jumper with Disconnect and Piggyback
$1.730 - $1.870
- SKU:
- EJ14
- Minimum Purchase:
- 10 units
Related Products
Product Description
| AWG | 14 |
| Insulation Colors | Black, Red, Orange, Yellow, or Blue |
| Lengths | 4" or 6" |
| Terminal 1 | 0.250 Female Disconnect |
| Terminal 2 | 0.250 Disconnect w/ Male Tab |
Wiring a piece of equipment with short wires can be frustrating. Not to mention time-consuming. Having to prepare all the wires by stripping and terminating them can take more time than you might expect. Then you have to add heat shrink for protection. By using wire jumpers, all the hard work is already done. All you need to do is plug them in. That's it. No need to strip, terminate, heat shrink or anything else. Pacer's 14 AWG jumpers are perfect for connecting lights from switch to switch. They are also used to connect switch light grounds or to jumper from switch to breaker.
All Pacer wire jumpers are manufactured from Type III Class K tinned copper conductors. The wire is insulated with a durable yet flexible PVC jacket. After that, they are cut to exact lengths and terminated. A waterproof heat shrink tube is used for extra protection. All Pacer's wire jumpers meet the requirements and standards of UL, ABYC, and NMMA.
Characteristics:
- Conductor: Annealed finely stranded tinned copper ASTM B172 Class K
- Insulation: -20 °C to 105 °C Flexible, Color Coded PVC
- Temperature Rating: 105 °C Dry, 75 °C Wet, 60 °C Oil
- Voltage Rating: 600-V
- Resistant to: acid, alkali, abrasion, flame, gasoline, oil & moisture
Compliances:
- UL Stranded 1426 BC-5W2
- AWM 1015/1230
- MTW
- ABYC: E-11.15
- Coast Guard: 33 CFR 183.401 Subpart 1-Electrical Systems
Features:
- Stranded, tinned copper conductors
- Highly flexible color coded insulation