null

Boot, Alternator Type

$0.830 - $3.380
SKU:
TBCA
Grand Total:
0.83
Add to Custom Catalog

Related Products

Product Description

battery-posts-and-boots-sheet-title-banner.jpg

Size Explanation See Table
Boot Style  Alternator Style
Material  Heavy Duty PVC

Compliances:

  • Meets Coast Guard 33 CFR Part 183 Subpart 1
  • Meets S.A.E. J378 and J1128 (low voltage caps)
  • Meets UL 94 V2 Rated 105 °C

Protecting your battery connections is just as important as protecting your battery. If damage occurs to the battery connections, it can lead to all sorts of issues. Damage can be either physical impact or corrosion due to exposure. Is there a way to protect your battery connections? Yes, there is, and it's easier than you think. Alternator style battery boots prevent shocks, shorts, and corrosion. This style boot is typically used to cover a ring terminal or lug on an alternator or starter. Alternator type boots offer protection for continuously energized parts. Most commonly this will include the positive battery terminal. Alternator type boots can also be used on both ends of wires connected to continuously energized sources. To use, disconnect the point you would like to cover. Next, slide the alternator type boot over the existing cable and lug. After you reconnect the cable, pull the alternator type boot into place making sure to cover the connection point. If you have any questions about this or any of our products, contact a Pacer expert today.

Features:

  • Polyvinyl chloride 105°C
  • Helps prevent electrical shorts and shock
  • Recommended per ABYC E-10.6(1)

Applications:

  • Protects against corrosion and shorting
  • Covers a power or ground on an alternator or starter

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!